NEC XN120 - Serial connection
These instructions help you configure your NEC XN120 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Support files
Ensure the following support files exist in the /config/ folder of the TIM Plus application:
NEC DXE.TDT
NEC DXE.TDS
Contents
Configure the SMDR output
You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.
Follow the steps below to configure the SMDR output on your NEC XN120:
Log in to your PC Pro/Web Pro software.
To configure SMDR output by serial port, apply the following settings:
| Adapter | Programming code | Value | Description |
|---|---|---|---|
| NTCPU - Serial | 10-21-02 | 1 | NTCPU Hardware Setup - Baud Rate for Com Port. Choose from the three available options: 0(4800), 1(9600) and 2(38400). |
| 35-01-01 | 1 | SMDR Options - Output Port Type. |
- Apply the following settings in the programming sections below:
| Programming code | Value | Description |
|---|---|---|
| 14-01-06 | 1 | Basic Trunk Data Setup - SMDR Print. |
| 15-01-03 | 1 | Basic Extension Data Setup - SMDR Print. |
| 35-01-03 | 0 | SMDR Options - Header Language. |
| 35-01-04 | 0 | SMDR Options - Omit (Mask) Digits. |
| 35-01-05 | 0 | SMDR Options - Minimum Number of SMDR Digits. |
| 35-01-06 | 0 | SMDR Options - Minimum Call Duration. |
| 35-01-07 | 0 | SMDR Options - Minimum Ringing Time. |
| 35-01-08 | Default | SMDR Options - SMDR Format. |
| 35-02-01 | 0 | SMDR Output Options - Toll Restricted Call. |
| 35-02-02 | 1 | SMDR Output Options - PBX Calls. |
| 35-02-03 | 1 | SMDR Output Options - Display Trunk Name or Numbers. |
| 35-02-04 | 0 | SMDR Output Options - Daily Summary. |
| 35-02-05 | 0 | SMDR Output Options - Weekly Summary. |
| 35-02-06 | 0 | SMDR Output Options - Monthly Summary. |
| 35-02-08 | 1 | SMDR Output Options - Incoming calls. |
| 35-02-09 | 0 | SMDR Output Options - Print Name or Numbers. |
| 35-02-10 | 0 | SMDR Output Options - All Lines Busy (ALB) Output. |
| 35-02-12 | 0 | SMDR Output Options - DID Table Name Output. |
| 35-02-13 | 1 | SMDR Output Options - CLI Output when DID to Trunk. |
| 35-02-14 | 1 | SMDR Output Options - Date. |
| 35-02-15 | 1 | SMDR Output Options - CLI/DID Number Switching. |
| 35-02-16 | 1 | SMDR Output Options - Print Trunk Name or Received Dialled Number. |
| 35-02-17 | 0 | SMDR Output Options - Print Account Code or Caller ID Name. |
| 35-02-18 | Default | SMDR Output Options - Caller ID Name Output Method. |
| 80-05-01 | 1 | Date Format for SMDR and System Reports. |
Installing NetPBX
To capture SMDR data from your NEC XN120 using a serial connection, you first need to install the NetPBX software to collect the data from the serial port and send it to TIM Plus. For setup instructions, click on the link below:
Install and configure NetPBX
Configure TIM Plus
Follow the steps below to configure TIM Plus to connect to your NEC XN120:
- Click on the
Directorytab. - If you don't have a site set up, press
Addand selectPBXfrom the drop-down menu. In the dialogue window, name your site and then selectAdd. - Locate the site object you want to configure in the Directory, click on it and select
Properties.
- In the Site Properties window, select NEC DXE from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the
Optionstab and tick the Keep a local backup of any data tickbox, as shown below
- Click on the
Savebutton to apply the settings.