Skip to main content

Panasonic KX-TD Series

These instructions help you configure your Panasonic KX-TD Series phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Plus application:

Panasonic KX-TD Series.TDS
Panasonic KX-TD Series.TDT

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

Follow the instructions below to configure your Panasonic KX-TD phone system to output SMDR data to TIM Plus. The configuration needs to be performed from a Digital Proprietary Telephone (DPT) such as the KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235.

  1. Press the PROG + * + # buttons simultaneously, then enter your system password.
  2. Enter programming mode 800 and press the Next button.
  3. Press the Select button to set the Outgoing option to All, then click on the Store button. Click Next.
  4. Press the Select button to set the Incoming option to All, then press the Store button.
  5. Press the End button to complete the configuration.

Installing NetPBX​

The Panasonic KX-TD Series phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configure TIM Plus​

Follow the steps below to configure TIM Plus to connect to your Panasonic KX-TD Series:

  1. Click on the Directory tab.
  2. If you don't have a site set up, press Add and select PBX from the drop-down menu. In the dialogue window, name your site and then select Add.
  3. Locate the site object you want to configure in the Directory, click on it and select Properties. panasonic_kx_ta
  4. In the Site Properties window, select Panasonic ICX S-ICX from the PBX model drop-down list.
  5. In the Connection method field, select No connection required from the drop-down list.
  6. Click on the Save button to apply the settings.