Skip to main content

Samsung DCS

These instructions help you configure your Samsung DCS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Plus application:

Samsung DCS.TDT
Samsung DCS.TDS

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

Follow the instructions below to configure your Samsung DCS to output SMDR data to TIM Plus. The configuration needs to be performed from an LCD handset.

Open Programming and select 725. Program each option as presented below:

SMDR fieldValue
Page HeaderYes
Lines per page1
Incoming CallYes
Outgoing CallYes
Authorise CodeYes
SMDR Start TimeYes
In/Out GroupNo
DND CallsNo
Wake-Up CallsNo
Directory NamesNone
Caller ID DataYes
Abandoned CallYes
No of Dial Mask00
DID Num/NameYes

Next, press the SPKR key and select 804. Dial 0 and use the arrow keys to select SMDR. Press the TRSF key to complete the configuration.

Installing NetPBX​

The Samsung DCS phone system sends SMDR data via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configure TIM Plus​

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the steps below:

  1. Click on the Directory tab.
  2. If you don't have a site set up, press Add and select PBX from the drop-down menu. In the dialogue window, name your site and then select Add.
  3. Locate the site object you want to configure in the Directory, click on it and select Properties. samsung_dcs_1
  4. In the Site Properties window, select Samsung DCS from the PBX model drop-down list.
  5. In the Connection method field select No connection required from the drop-down list.
  6. Click on the Save button to apply the settings.